Model	PTVW-D10N
Working principle	Photoelectric sensor
Housing style	Square
Optical working principle	Diffuse reflection
Detection Range	100mm
Spot Size	Not applicable (infrared light)
Light Source	Infrared LED 940nm (modulated)
Indicator light	Output function: red LED, running status: green LED
Sensitivity Adjustment	1 turn potentiometer
Switch Mode	L.on (light entry action) /D.on (light blocking action) can be switched
Output Mode	NPN open collector
Response Time	≤1ms
Switching frequency	2kHz
Repeatability	≤5%
Hysteresis	≤20%
Operating Voltage	10~30V DC
Current consumed	≤20mA
Residual Voltage	≤1.5V (100mA)
Load Current	≤100mA (30VDC)
Insulation Resistance	≥50MΩ (500VDC) between power terminal and housing
Withstand Voltage	1000VAC (50/60Hz), 1 minute between the power terminal and housing
ProtectiOn Circuit	Power supply reverse polarity protection/output reverse polarity protection/surge protection/short circuit protection
Operating temperature	-25~55℃(without freezing)
Storage Temperature	-30℃~+70℃(without freezing)
Operating humidity	35~85%RH (no condensation)
Storage Humidity	35 to 95%RH (no condensation)
Ambient light	Incandescent lamp ≤3000 Lux; Sunlight exposure ≤ 10,000 Lux
Vibration Resistance	10~55Hz, 1.5mm amplitude, 2 hours in each of the X, Y and Z directions
Protection rating	IP65
Maximum Tightening Torque	0.5 Nm or less
Connection Method	2M/3 Core Cable
Dimensions	11.0 x31.0 x20.0 mm
Material	PBT+ fiberglass
Weight	0.049 kg
Accessories	Screwdriver

PTVW-D10N